Leggings · Intermediate

Paneled leggings sewing pattern

Leggings with design panels and seams.

Choose your size

Each size has its own page with the full pattern, the cutting list and the measurements used.

Pattern preview

Paneled leggings sewing pattern
Full pattern with 1 cm seam allowance · 79 × 61 cm
4pattern pieces
8pieces to cut
≈ 1 ydof main fabric (60" wide)

Sewing instructions

General steps to sew this garment. Seam allowance is 1 cm (3/8") unless stated otherwise.

Supplies

  • Four-way stretch fabric
  • Waistband elastic
  • Matching thread and the right needle
  1. Prewash and press your fabric before cutting so it will not shrink after sewing.
  2. Print the pattern at 100%, check the test square and cut the pieces following the cutting list. Transfer notches, darts and button marks.
  3. Cut with the greatest stretch running horizontally (around the body). Use pattern weights instead of pins so the knit does not distort.
  4. Sew knits with a serger or a stretch stitch (narrow zigzag) and a ballpoint needle.
  5. Join the panels of each leg matching the notches.
  6. Put one leg inside the other, right sides together, and sew the crotch seam in one go, matching the inseams.
  7. Close the waistband into a loop, enclose the elastic and sew it to the waist while stretching.
  8. Fold up the hems (sleeves and body) and stitch with a twin needle or zigzag so they keep their stretch.

Cutting list

PieceCutMaterial
Panel2×Main fabric
Leg2×Main fabric
Waistband2× on the foldMain fabric
Pocket2×Main fabric

Measurements needed

MeasurementHow to measure
Waist circumferenceAround your natural waist, the narrowest part of the torso.
Waist backBack part of the waist circumference, side to side.
Hip circumferenceAround the hips, at the level of the hip bones.
Seat circumferenceAround the fullest part of the buttocks.
Seat backBack part of the seat circumference, side to side.
InseamFrom the crotch to the floor along the inside of the leg.
Waist to seatAlong the side, from the waist to the fullest part of the buttocks.
Waist to thighAlong the side, from the waist to the thigh line.
Waist to kneeAlong the side, from the waist to the knee.
Waist to hipsAlong the side, from the waist to the hip line.
Waist to floorAlong the side, from the waist to the floor, barefoot.
Knee circumferenceAround the knee, with the leg straight.
Ankle circumferenceAround the ankle, over the ankle bone.
Cross seamFrom the front waist, between the legs, to the back waist.
Front cross seamFrom the front waist to the crotch point.
Heel circumferenceAround the heel and instep, with the foot pointed.
Thigh circumferenceAround the top of the thigh.

FAQ

Is the paneled leggings pattern really free?

Yes. Every Kutopy pattern is free, with no sign-up and no watermarks. You can sew and sell what you make.

Which measurements do I need?

This pattern uses 17 body measurements. If you don't know them, pick a standard size or follow our measuring guide.

Does it include seam allowance?

Yes, it includes 1 cm (3/8") seam allowance (outer dashed line). You can remove it in the editor.

How do I print it at full scale?

In the editor pick your paper and tap "Download PDF". At home: numbered Letter or A4 pages you tape together. At a print shop or plotter: full size on one sheet, a 36" roll or large sheets. Always print at 100% and check the 10 × 5 cm test square.

More leggings patterns