Skirts · Intermediate
Pencil skirt sewing pattern
Darted pencil skirt with or without a back vent.
Choose your size
Each size has its own page with the full pattern, the cutting list and the measurements used.
Pattern preview
Sewing instructions
General steps to sew this garment. Seam allowance is 1 cm (3/8") unless stated otherwise.
Supplies
- Woven fabric (cotton, linen, poplin…)
- Invisible zipper
- Fusible interfacing
- Matching thread and the right needle
- Prewash and press your fabric before cutting so it will not shrink after sewing.
- Print the pattern at 100%, check the test square and cut the pieces following the cutting list. Transfer notches, darts and button marks.
- Sew the darts from the edge to the point, tie off without backstitching and press them toward the center.
- Insert the invisible zipper in the back or side seam and close the rest of the seam.
- Sew the side seams right sides together and press open or finish the allowances.
- Interface the waist facings, attach them to the skirt, turn and understitch so they stay inside.
- If you chose a back vent, fold it and stitch it diagonally at the top.
- Hem: double-fold to the inside, press and topstitch or blind stitch.
Cutting list
| Piece | Cut | Material |
|---|---|---|
| Back | 2× | Main fabric |
| Front | 1× | Main fabric |
| Waistband | 1× | Main fabric |
Measurements needed
| Measurement | How to measure |
|---|---|
| Waist circumference | Around your natural waist, the narrowest part of the torso. |
| Seat circumference | Around the fullest part of the buttocks. |
| Waist to hips | Along the side, from the waist to the hip line. |
| Waist to seat | Along the side, from the waist to the fullest part of the buttocks. |
| Waist to knee | Along the side, from the waist to the knee. |
FAQ
Is the pencil skirt pattern really free?
Yes. Every Kutopy pattern is free, with no sign-up and no watermarks. You can sew and sell what you make.
Which measurements do I need?
This pattern uses 5 body measurements. If you don't know them, pick a standard size or follow our measuring guide.
Does it include seam allowance?
Yes, it includes 1 cm (3/8") seam allowance (outer dashed line). You can remove it in the editor.
How do I print it at full scale?
In the editor pick your paper and tap "Download PDF". At home: numbered Letter or A4 pages you tape together. At a print shop or plotter: full size on one sheet, a 36" roll or large sheets. Always print at 100% and check the 10 × 5 cm test square.
