Toys & plushies · Advanced
Shark plush sewing pattern
The friendliest stuffed shark in the world.
Pattern preview
9pattern pieces
14pieces to cut
≈ 1.75 ydof main fabric (60" wide)
Sewing instructions
General steps to sew this garment. Seam allowance is 1 cm (3/8") unless stated otherwise.
Supplies
- Minky, fleece or cotton
- Fiberfill stuffing
- Matching thread and the right needle
- Print the pattern at 100%, check the test square and cut the pieces following the cutting list. Transfer notches, darts and button marks.
- Sew the fins and mouth first, then join the body sides.
- Attach the belly leaving an opening for stuffing.
- Turn the piece through the opening, push out the corners and press.
- Stuff with fiberfill a little at a time, pushing well into the tips, and close the opening with a ladder stitch.
Cutting list
| Piece | Cut | Material |
|---|---|---|
| Body | 2× | Main fabric |
| Tail | 2× | Main fabric |
| Lower teeth | 1× | Main fabric |
| Upper teeth | 1× | Main fabric |
| Mouth | 1× | Main fabric |
| Above mouth | 2× | Main fabric |
| Belly | 1× | Main fabric |
| Top of fin | 2× | Main fabric |
| Bottom of fin | 2× | Main fabric |
FAQ
Is the shark plush pattern really free?
Yes. Every Kutopy pattern is free, with no sign-up and no watermarks. You can sew and sell what you make.
Does it include seam allowance?
Yes, it includes 1 cm (3/8") seam allowance (outer dashed line). You can remove it in the editor.
How do I print it at full scale?
In the editor pick your paper and tap "Download PDF". At home: numbered Letter or A4 pages you tape together. At a print shop or plotter: full size on one sheet, a 36" roll or large sheets. Always print at 100% and check the 10 × 5 cm test square.
