Pants & shorts · Intermediate
Chinos sewing pattern
Chino trousers with slant pockets, zip fly and waistband.
Choose your size
Each size has its own page with the full pattern, the cutting list and the measurements used.
Women's sizes (with bust)
Pattern preview
You will also need: lining, interfacing.
Sewing instructions
General steps to sew this garment. Seam allowance is 1 cm (3/8") unless stated otherwise.
Supplies
- Woven fabric (cotton, linen, poplin…)
- Lining fabric
- Zipper
- Buttons
- Matching thread and the right needle
- Prewash and press your fabric before cutting so it will not shrink after sewing.
- Print the pattern at 100%, check the test square and cut the pieces following the cutting list. Transfer notches, darts and button marks.
- Make the front pockets: facing and pocket bag, topstitch the opening and baste at the side.
- Sew the back pockets (welt or patch) and any darts.
- Install the zip fly: fly facing, fly shield and J-stitch.
- Sew the outseams, then the inseams of each leg.
- Put one leg inside the other, right sides together, and sew the crotch seam in one go, matching the inseams.
- Interface the waistband, sew it to the waist, fold it to the inside and finish by hand or by stitching in the ditch.
- Make the belt loops, attach them at the waist and add the button and buttonhole on the waistband.
- Hem: double-fold to the inside, press and topstitch or blind stitch.
Cutting list
| Piece | Cut | Material |
|---|---|---|
| Front | 2× | Main fabric |
| Back | 2× | Main fabric |
| Waistband | 1× | Main fabric |
| Front pocket bag | 2× | Lining |
| Front pocket facing | 4× | Main fabric |
| Back pocket bag | 2× | Lining |
| Back pocket bag facing | 2× | Main fabric |
| Back pocket interfacing | 2× | Interfacing |
| Back pocket welt | 4× | Main fabric |
| Fly facing | 1× | Main fabric |
| Fly extension | 1× on the fold | Main fabric |
| Belt loops | 1× | Main fabric |
Measurements needed
| Measurement | How to measure |
|---|---|
| Cross seam | From the front waist, between the legs, to the back waist. |
| Front cross seam | From the front waist to the crotch point. |
| Knee circumference | Around the knee, with the leg straight. |
| Seat circumference | Around the fullest part of the buttocks. |
| Seat back | Back part of the seat circumference, side to side. |
| Waist circumference | Around your natural waist, the narrowest part of the torso. |
| Waist back | Back part of the waist circumference, side to side. |
| Waist to floor | Along the side, from the waist to the floor, barefoot. |
| Waist to knee | Along the side, from the waist to the knee. |
| Waist to hips | Along the side, from the waist to the hip line. |
| Waist to seat | Along the side, from the waist to the fullest part of the buttocks. |
| Waist to thigh | Along the side, from the waist to the thigh line. |
FAQ
Is the chinos pattern really free?
Yes. Every Kutopy pattern is free, with no sign-up and no watermarks. You can sew and sell what you make.
Which measurements do I need?
This pattern uses 12 body measurements. If you don't know them, pick a standard size or follow our measuring guide.
Does it include seam allowance?
Yes, it includes 1 cm (3/8") seam allowance (outer dashed line). You can remove it in the editor.
How do I print it at full scale?
In the editor pick your paper and tap "Download PDF". At home: numbered Letter or A4 pages you tape together. At a print shop or plotter: full size on one sheet, a 36" roll or large sheets. Always print at 100% and check the 10 × 5 cm test square.
