Pants & shorts · Intermediate

Climbing pants sewing pattern

Technical pants with plenty of freedom of movement.

Choose your size

Each size has its own page with the full pattern, the cutting list and the measurements used.

Pattern preview

Climbing pants sewing pattern
Full pattern with 1 cm seam allowance · 123 × 101 cm
9pattern pieces
23pieces to cut
≈ 2.5 ydof main fabric (60" wide)

Sewing instructions

General steps to sew this garment. Seam allowance is 1 cm (3/8") unless stated otherwise.

Supplies

  • Stretch technical fabric or canvas
  • Zipper
  • Matching thread and the right needle
  1. Prewash and press your fabric before cutting so it will not shrink after sewing.
  2. Print the pattern at 100%, check the test square and cut the pieces following the cutting list. Transfer notches, darts and button marks.
  3. Make the front pockets: facing and pocket bag, topstitch the opening and baste at the side.
  4. Install the zip fly: fly facing, fly shield and J-stitch.
  5. Sew the crotch gusset between the legs for extra mobility.
  6. Sew the outseams, then the inseams of each leg.
  7. Interface the waistband, sew it to the waist, fold it to the inside and finish by hand or by stitching in the ditch.
  8. Hem: double-fold to the inside, press and topstitch or blind stitch.

Cutting list

PieceCutMaterial
Front2×Main fabric
Back2×Main fabric
Gusset1×Main fabric
Fly shield1× on the foldMain fabric
Front pocket2×Main fabric
Front pocket2×Main fabric
Front pocket facing2×Main fabric
Front pocket facing2×Main fabric
Pocket back2×Main fabric
Pocket back2×Main fabric
Back pocket facing2×Main fabric
Back pocket facing2×Main fabric
Waistband1× on the foldMain fabric

Measurements needed

MeasurementHow to measure
Waist circumferenceAround your natural waist, the narrowest part of the torso.
Hip circumferenceAround the hips, at the level of the hip bones.
InseamFrom the crotch to the floor along the inside of the leg.
Seat circumferenceAround the fullest part of the buttocks.
Waist to kneeAlong the side, from the waist to the knee.
Waist to hipsAlong the side, from the waist to the hip line.
Waist to floorAlong the side, from the waist to the floor, barefoot.
Knee circumferenceAround the knee, with the leg straight.
Waist backBack part of the waist circumference, side to side.
Seat backBack part of the seat circumference, side to side.
Waist to seatAlong the side, from the waist to the fullest part of the buttocks.
Heel circumferenceAround the heel and instep, with the foot pointed.

FAQ

Is the climbing pants pattern really free?

Yes. Every Kutopy pattern is free, with no sign-up and no watermarks. You can sew and sell what you make.

Which measurements do I need?

This pattern uses 12 body measurements. If you don't know them, pick a standard size or follow our measuring guide.

Does it include seam allowance?

Yes, it includes 1 cm (3/8") seam allowance (outer dashed line). You can remove it in the editor.

How do I print it at full scale?

In the editor pick your paper and tap "Download PDF". At home: numbered Letter or A4 pages you tape together. At a print shop or plotter: full size on one sheet, a 36" roll or large sheets. Always print at 100% and check the 10 × 5 cm test square.

More pants & shorts patterns