Sweatshirts & hoodies · Intermediate
Fitted hoodie sewing pattern
Hoodie with a fitted silhouette.
Choose your size
Each size has its own page with the full pattern, the cutting list and the measurements used.
Pattern preview
You will also need: ribbing.
Sewing instructions
General steps to sew this garment. Seam allowance is 1 cm (3/8") unless stated otherwise.
Supplies
- French terry or sweatshirt fleece
- Ribbing for cuffs and neckline
- Matching thread and the right needle
- Prewash and press your fabric before cutting so it will not shrink after sewing.
- Print the pattern at 100%, check the test square and cut the pieces following the cutting list. Transfer notches, darts and button marks.
- Cut with the greatest stretch running horizontally (around the body). Use pattern weights instead of pins so the knit does not distort.
- Sew knits with a serger or a stretch stitch (narrow zigzag) and a ballpoint needle.
- Join front and back at the shoulders, right sides together. You can stabilize the seam with clear elastic or a strip of selvage.
- Sew the hood center seam (or center panel to the sides), finish the front edge and attach it to the neckline matching center back.
- Set the sleeves in flat: match the top of the sleeve cap to the shoulder seam and ease the cap between the notches.
- Sew the underarm and side seam in one go, matching the armhole seams.
- Close the rib cuffs and hem band into loops, fold them in half and sew them on, stretching them to fit the garment.
Cutting list
| Piece | Cut | Material |
|---|---|---|
| Back | 1× | Main fabric |
| Front | 1× | Main fabric |
| Hood | 4× | Main fabric |
| Hood center | 2× | Main fabric |
| Sleeve | 2× | Main fabric |
| Cuff | 2× | Ribbing |
| Waistband | 1× | Ribbing |
Measurements needed
| Measurement | How to measure |
|---|---|
| Head circumference | Around the head, above the eyebrows and ears. |
| Biceps circumference | Around the widest part of the relaxed upper arm. |
| Chest/bust circumference | Around the torso at the fullest part of the chest, tape level. |
| Back length | From the high shoulder point, down the back, to the waist. |
| Neck circumference | Around the base of the neck, where a shirt collar sits. |
| Shoulder width | From one shoulder point to the other, across the back. |
| Shoulder slope | Shoulder angle in degrees (usually between 10 and 15). |
| Waist to armpit | Vertically along the side, from the waist to the armpit. |
| Waist to seat | Along the side, from the waist to the fullest part of the buttocks. |
| Seat circumference | Around the fullest part of the buttocks. |
| Waist circumference | Around your natural waist, the narrowest part of the torso. |
| Arm length | From the shoulder point to the wrist, arm slightly bent. |
| Wrist circumference | Around the wrist, over the bone. |
FAQ
Is the fitted hoodie pattern really free?
Yes. Every Kutopy pattern is free, with no sign-up and no watermarks. You can sew and sell what you make.
Which measurements do I need?
This pattern uses 13 body measurements. If you don't know them, pick a standard size or follow our measuring guide.
Does it include seam allowance?
Yes, it includes 1 cm (3/8") seam allowance (outer dashed line). You can remove it in the editor.
How do I print it at full scale?
In the editor pick your paper and tap "Download PDF". At home: numbered Letter or A4 pages you tape together. At a print shop or plotter: full size on one sheet, a 36" roll or large sheets. Always print at 100% and check the 10 × 5 cm test square.
