T-shirts & tops · Easy
Fitted top sewing pattern
Close-fitting top, versatile for knits or wovens.
Choose your size
Each size has its own page with the full pattern, the cutting list and the measurements used.
Pattern preview
Sewing instructions
General steps to sew this garment. Seam allowance is 1 cm (3/8") unless stated otherwise.
Supplies
- Knit fabric (jersey, interlock or similar)
- Matching thread and the right needle
- Prewash and press your fabric before cutting so it will not shrink after sewing.
- Print the pattern at 100%, check the test square and cut the pieces following the cutting list. Transfer notches, darts and button marks.
- Sew knits with a serger or a stretch stitch (narrow zigzag) and a ballpoint needle.
- Sew the darts from the edge to the point, tie off without backstitching and press them toward the center.
- Join front and back at the shoulders, right sides together. You can stabilize the seam with clear elastic or a strip of selvage.
- Prepare the knit bindings: fold in half, sew to the edge with slight stretch, turn them to the inside and topstitch from the right side.
- Sew the side seams right sides together and press open or finish the allowances.
- Fold up the hems (sleeves and body) and stitch with a twin needle or zigzag so they keep their stretch.
Cutting list
| Piece | Cut | Material |
|---|---|---|
| Back | 1× | Main fabric |
| Front | 1× | Main fabric |
| Sleeve | 2× | Main fabric |
Measurements needed
| Measurement | How to measure |
|---|---|
| Head circumference | Around the head, above the eyebrows and ears. |
| Biceps circumference | Around the widest part of the relaxed upper arm. |
| Chest/bust circumference | Around the torso at the fullest part of the chest, tape level. |
| Back length | From the high shoulder point, down the back, to the waist. |
| Neck circumference | Around the base of the neck, where a shirt collar sits. |
| Shoulder width | From one shoulder point to the other, across the back. |
| Shoulder slope | Shoulder angle in degrees (usually between 10 and 15). |
| Waist to armpit | Vertically along the side, from the waist to the armpit. |
| Waist to seat | Along the side, from the waist to the fullest part of the buttocks. |
| Seat circumference | Around the fullest part of the buttocks. |
| Waist circumference | Around your natural waist, the narrowest part of the torso. |
| Arm length | From the shoulder point to the wrist, arm slightly bent. |
| Wrist circumference | Around the wrist, over the bone. |
FAQ
Is the fitted top pattern really free?
Yes. Every Kutopy pattern is free, with no sign-up and no watermarks. You can sew and sell what you make.
Which measurements do I need?
This pattern uses 13 body measurements. If you don't know them, pick a standard size or follow our measuring guide.
Does it include seam allowance?
Yes, it includes 1 cm (3/8") seam allowance (outer dashed line). You can remove it in the editor.
How do I print it at full scale?
In the editor pick your paper and tap "Download PDF". At home: numbered Letter or A4 pages you tape together. At a print shop or plotter: full size on one sheet, a 36" roll or large sheets. Always print at 100% and check the 10 × 5 cm test square.
