T-shirts & tops · Easy

Tank top sewing pattern

Athletic shirt or tank top in knit fabric, with bound neckline and armholes.

Choose your size

Each size has its own page with the full pattern, the cutting list and the measurements used.

Pattern preview

Tank top sewing pattern
Full pattern with 1 cm seam allowance · 63 × 60 cm
4pattern pieces
5pieces to cut
≈ 1 ydof main fabric (60" wide)

Sewing instructions

General steps to sew this garment. Seam allowance is 1 cm (3/8") unless stated otherwise.

Supplies

  • Knit fabric (jersey, interlock or similar)
  • Matching thread and the right needle
  1. Prewash and press your fabric before cutting so it will not shrink after sewing.
  2. Print the pattern at 100%, check the test square and cut the pieces following the cutting list. Transfer notches, darts and button marks.
  3. Cut with the greatest stretch running horizontally (around the body). Use pattern weights instead of pins so the knit does not distort.
  4. Sew knits with a serger or a stretch stitch (narrow zigzag) and a ballpoint needle.
  5. Join front and back at the shoulders, right sides together. You can stabilize the seam with clear elastic or a strip of selvage.
  6. Sew the side seams right sides together and press open or finish the allowances.
  7. Prepare the knit bindings: fold in half, sew to the edge with slight stretch, turn them to the inside and topstitch from the right side.
  8. Fold up the hems (sleeves and body) and stitch with a twin needle or zigzag so they keep their stretch.

Cutting list

PieceCutMaterial
Front1× on the foldMain fabric
Back1× on the foldMain fabric
Arm binding2×Main fabric
Neck binding1×Main fabric

Measurements needed

MeasurementHow to measure
Biceps circumferenceAround the widest part of the relaxed upper arm.
Chest/bust circumferenceAround the torso at the fullest part of the chest, tape level.
Shoulder to bustFrom the high point of the shoulder (next to the neck) to the bust point.
Back lengthFrom the high shoulder point, down the back, to the waist.
Neck circumferenceAround the base of the neck, where a shirt collar sits.
Shoulder widthFrom one shoulder point to the other, across the back.
Shoulder slopeShoulder angle in degrees (usually between 10 and 15).
Waist to armpitVertically along the side, from the waist to the armpit.
Waist to hipsAlong the side, from the waist to the hip line.
Hip circumferenceAround the hips, at the level of the hip bones.

FAQ

Is the tank top pattern really free?

Yes. Every Kutopy pattern is free, with no sign-up and no watermarks. You can sew and sell what you make.

Which measurements do I need?

This pattern uses 10 body measurements. If you don't know them, pick a standard size or follow our measuring guide.

Does it include seam allowance?

Yes, it includes 1 cm (3/8") seam allowance (outer dashed line). You can remove it in the editor.

How do I print it at full scale?

In the editor pick your paper and tap "Download PDF". At home: numbered Letter or A4 pages you tape together. At a print shop or plotter: full size on one sheet, a 36" roll or large sheets. Always print at 100% and check the 10 × 5 cm test square.

More t-shirts & tops patterns